Honeywell Fixed Gas Detection
Fixed Gas Detecting solutions by Honeywell.
Browse Items

Searchline Excel™ Plus & Edge Open Path Flammable Gas
Searchline Excel™ Plus & Searchline Excel™ Edge are the next generation open path flammable gas detectors. The Searchline Excel™ Plus is a medium range detector from 2 to 120 meters . The Searchline Excel™ Edge is a long range detector from 60 to 330 meters. Both come standard with HART® over the 4-20 mA analog output, Modbus, and Bluetooth®. The relays for Alarm 1, Alarm 2 and Fault are included, and may be configured normally open or normally closed, latching or non-latching. The new Searchline Excel features a multi-colored, highly visible LED halo to indicate status locally eliminating the need for an additional device. The Searchline Excel Plus & Edge come with global certifications and approvals simplifying the ordering process.

Searchzone SonikTM
The new Honeywell Searchzone Sonik is a robust and reliable gas leak detector that will efficiently “hear” the loss of containment of any high-pressure gas within it's detection zone. An advanced, SIL 2 certified (pending), hazardous area ultrasonic gas leak detector, the Searchzone Sonik responds to the ultrasonic sound pressure level produced by pressurized gas leaks and is unaffected by environmental conditions. Searchzone Sonik is factory calibrated. Its robust sealed design with no moving parts and the piezo-based sensor allow for mounting in any orientation, even in the harshest environments. The gas leak detector will respond quickly to a gas leak within a sensing range radius of typically 20m, dependent upon background noise. The intelligent background noise detection system allows the detector to be set up for maximum sensitivity while avoiding nuisance alarms. This way you have confidence that you’ll always stay safe and sound

FS20X Flame Detector
Based on the foundation of the highly successful and reliable SS4 Flame Detector, the FS20X Flame Detector represents a quantum leap in integrating Infrared and Ultraviolet sensing technologies. The FS20X is a Multi-Spectrum and UV/Dual IR/VIS Flame Detector with a proven UV solar-blind sensor. The FS20X exhibits faster false-alarm free response to fires over a wider temperature range and with a much longer detection range compared to conventional UV/IR detectors. Conventional and older technology UV/IR detectors, using narrow band 4.3 micron IR sensors, will not respond to smoky fires or if the detector lens is contaminated with oil and other substances since both UV and 4.3 micron signals are attenuated, obscured or absorbed by thick smoke or detector lens contaminants. Also, these old technology UV/IR detectors will not alarm to any fire if they are installed behind ordinary window glass.

FS24X Plus - Triple Infrared Flame Detector
FS24X Plus is the next generation 3IR flame detector for the detection of both hydrocarbon and hydrogen fires. Performance certified to FM3260 and EN54-10 and SIL2 certified to EN61508.The FS24X Plus comes standard with HART® over the 4-20 mA analog output. The relays for Alarm, Auxiliary, and Fault are included, and may be configured normally open or normally closed, latching or non-latching. The FS24X Plus features a multi-colored, highly visible LED halo to indicate status locally eliminating the need for an additional device. The detector logs up to 5000 events and ten 30-second FirePics™. The FS24X Plus is 100% backward compatible with FS24X for replacement applications.

Series FSL100 Flame Detectors
The new FSL100 series is the latest generation range of Mid market Flame Detectors from Honeywell Analytics. The range consists of UV, UVIR and IR3 flame detectors. All utilise sophisticated sensing and signal analysis to detect fires quickly while also rejecting false alarms. The FSL100 may be small and lightweight for easy installation but they are designed to work in tough environments both in and out of doors as well as potentially explosive atmospheres. With a large field of view they can detect a range of different types of fire including hydrocarbon and non hydrocarbon sources.

Honeywell FS7 Multi-Spectrum Fire and Flame Detector
Multi-Spectral Infrared and Visible Electro-Optical Fire Detector with sealed polypropylene enclosure. Two stage response, (ALERT & ALRAM), with 20ft teflon cable with pigtails, 41" Teflon sleeve. 24 VDC. Approvals: FM & CSFM; FM Certified for Class I, Div2.

Unipoint DIN Rail Mounted Controller
The Unipoint is a simple DIN rail mounted controller offering integrators a flexible and low cost solution to incorporate flammable, toxic or oxygen gas detection into their control systems. Unipoint can be easily installed into any plastic or metal enclosure for use indoor or outdoors and even in potentially explosive atmospheres. Each controller is supplied complete with all necessary removable terminals, DIN rail socket and power connector.

Touchpoint Plus Controller
Touchpoint Plus is an easily configurable, wall mounted control system that supports up to eight channels of gas detection with a further eight channels available through an optional expansion unit. It accepts inputs from 2 or 3-wire mA or mV field devices. Its intuitive, multilingual interface simplifies operation and reduces training requirements. The full colour traffic light style status indication provides clarity from a distance. Touchpoint Plus includes a comprehensive set of outputs as standard including common alarms and dedicated drives for remote audiovisual indicators.

Touchpoint Pro Controller
Honeywell’s Touchpoint Pro makes gas control system design, installation, configuration and operation simple. Touchpoint Pro uses a ‘building block’ approach, providing unrivalled flexibility. The building block approach employed by Touchpoint Pro delivers real value by being able to adapt to each unique system requirement. Ease of use and intuitive configuration ensures that installation, set-up and ongoing maintenance costs are reduced, providing a ‘no compromise’ solution designed to reduce the cost of on-site safety.

Honeywell OmniPoint
The Next Generation Gas Detection The OmniPoint™ transmitter is a comprehensive gas detection solution designed to operate in hazardous locations and support multiple sensors in the detection of toxic, oxygen, and flammable gas hazards. PROTECTING YOUR WORKERS AND YOUR ENTERPRISE OmniPoint™ utilizes multiple sensor technologies to meet diverse gas detection challenges in a variety of global industries. Full color, touch key interface and Bluetooth® enabled operation make setup and maintenance intuitive. Support for up to three sensors makes OmniPoint™ both flexible and scalable to meet your safety requirements.
Honeywell Fixed Gas Detection
Fixed Gas Detecting solutions by Honeywell.
Browse Items

Searchline Excel™ Plus & Edge Open Path Flammable Gas
Searchline Excel™ Plus & Searchline Excel™ Edge are the next generation open path flammable gas detectors. The Searchline Excel™ Plus is a medium range detector from 2 to 120 meters . The Searchline Excel™ Edge is a long range detector from 60 to 330 meters. Both come standard with HART® over the 4-20 mA analog output, Modbus, and Bluetooth®. The relays for Alarm 1, Alarm 2 and Fault are included, and may be configured normally open or normally closed, latching or non-latching. The new Searchline Excel features a multi-colored, highly visible LED halo to indicate status locally eliminating the need for an additional device. The Searchline Excel Plus & Edge come with global certifications and approvals simplifying the ordering process.

Searchzone SonikTM
The new Honeywell Searchzone Sonik is a robust and reliable gas leak detector that will efficiently “hear” the loss of containment of any high-pressure gas within it's detection zone. An advanced, SIL 2 certified (pending), hazardous area ultrasonic gas leak detector, the Searchzone Sonik responds to the ultrasonic sound pressure level produced by pressurized gas leaks and is unaffected by environmental conditions. Searchzone Sonik is factory calibrated. Its robust sealed design with no moving parts and the piezo-based sensor allow for mounting in any orientation, even in the harshest environments. The gas leak detector will respond quickly to a gas leak within a sensing range radius of typically 20m, dependent upon background noise. The intelligent background noise detection system allows the detector to be set up for maximum sensitivity while avoiding nuisance alarms. This way you have confidence that you’ll always stay safe and sound

FS20X Flame Detector
Based on the foundation of the highly successful and reliable SS4 Flame Detector, the FS20X Flame Detector represents a quantum leap in integrating Infrared and Ultraviolet sensing technologies. The FS20X is a Multi-Spectrum and UV/Dual IR/VIS Flame Detector with a proven UV solar-blind sensor. The FS20X exhibits faster false-alarm free response to fires over a wider temperature range and with a much longer detection range compared to conventional UV/IR detectors. Conventional and older technology UV/IR detectors, using narrow band 4.3 micron IR sensors, will not respond to smoky fires or if the detector lens is contaminated with oil and other substances since both UV and 4.3 micron signals are attenuated, obscured or absorbed by thick smoke or detector lens contaminants. Also, these old technology UV/IR detectors will not alarm to any fire if they are installed behind ordinary window glass.

FS24X Plus - Triple Infrared Flame Detector
FS24X Plus is the next generation 3IR flame detector for the detection of both hydrocarbon and hydrogen fires. Performance certified to FM3260 and EN54-10 and SIL2 certified to EN61508.The FS24X Plus comes standard with HART® over the 4-20 mA analog output. The relays for Alarm, Auxiliary, and Fault are included, and may be configured normally open or normally closed, latching or non-latching. The FS24X Plus features a multi-colored, highly visible LED halo to indicate status locally eliminating the need for an additional device. The detector logs up to 5000 events and ten 30-second FirePics™. The FS24X Plus is 100% backward compatible with FS24X for replacement applications.

Series FSL100 Flame Detectors
The new FSL100 series is the latest generation range of Mid market Flame Detectors from Honeywell Analytics. The range consists of UV, UVIR and IR3 flame detectors. All utilise sophisticated sensing and signal analysis to detect fires quickly while also rejecting false alarms. The FSL100 may be small and lightweight for easy installation but they are designed to work in tough environments both in and out of doors as well as potentially explosive atmospheres. With a large field of view they can detect a range of different types of fire including hydrocarbon and non hydrocarbon sources.

Honeywell FS7 Multi-Spectrum Fire and Flame Detector
Multi-Spectral Infrared and Visible Electro-Optical Fire Detector with sealed polypropylene enclosure. Two stage response, (ALERT & ALRAM), with 20ft teflon cable with pigtails, 41" Teflon sleeve. 24 VDC. Approvals: FM & CSFM; FM Certified for Class I, Div2.

Unipoint DIN Rail Mounted Controller
The Unipoint is a simple DIN rail mounted controller offering integrators a flexible and low cost solution to incorporate flammable, toxic or oxygen gas detection into their control systems. Unipoint can be easily installed into any plastic or metal enclosure for use indoor or outdoors and even in potentially explosive atmospheres. Each controller is supplied complete with all necessary removable terminals, DIN rail socket and power connector.

Touchpoint Plus Controller
Touchpoint Plus is an easily configurable, wall mounted control system that supports up to eight channels of gas detection with a further eight channels available through an optional expansion unit. It accepts inputs from 2 or 3-wire mA or mV field devices. Its intuitive, multilingual interface simplifies operation and reduces training requirements. The full colour traffic light style status indication provides clarity from a distance. Touchpoint Plus includes a comprehensive set of outputs as standard including common alarms and dedicated drives for remote audiovisual indicators.

Touchpoint Pro Controller
Honeywell’s Touchpoint Pro makes gas control system design, installation, configuration and operation simple. Touchpoint Pro uses a ‘building block’ approach, providing unrivalled flexibility. The building block approach employed by Touchpoint Pro delivers real value by being able to adapt to each unique system requirement. Ease of use and intuitive configuration ensures that installation, set-up and ongoing maintenance costs are reduced, providing a ‘no compromise’ solution designed to reduce the cost of on-site safety.

Honeywell OmniPoint
The Next Generation Gas Detection The OmniPoint™ transmitter is a comprehensive gas detection solution designed to operate in hazardous locations and support multiple sensors in the detection of toxic, oxygen, and flammable gas hazards. PROTECTING YOUR WORKERS AND YOUR ENTERPRISE OmniPoint™ utilizes multiple sensor technologies to meet diverse gas detection challenges in a variety of global industries. Full color, touch key interface and Bluetooth® enabled operation make setup and maintenance intuitive. Support for up to three sensors makes OmniPoint™ both flexible and scalable to meet your safety requirements.