Territory Instruments is very proud to represent the SulfiLogger in Australia and New Zealand. The SulfiLogger™ H2S Sensor provides superior insights that enable you to adopt a proactive and data-driven approach to odor and corrosion control in wastewater, biogas, and oil & gas industries.
- Measure in wastewater, in air, or in gases
- Get continuous data in SCADA / Cloud
- Patent-pending sensor technology
- ATEX, HazLoc, & IECEx (X1 sensors)
Waste Water Application
SulfiLogger™ H2S sensor – Measure H2S anywhere & without interruption.
The SulfiLogger™ H2S sensor measures H2S virtually anywhere in wastewater networks. The sensor’s liquid-phase measurements provides precise and reliable sulfide insights unaffected by ventilation, turbulence and other factors.
Use liquid-phase H2S measurements to reveal new insights in sewer systems and at wastewater treatment plants
With the SulfiLogger™ H2S sensor, you can continuously measure dissolved hydrogen sulfide (H2S) directly in raw wastewater. Liquid-phase measurements reveal new and better insights into the full downstream sulfide potential, whereas measurements in the degassed air rely on many factors including local turbulence and ventilation conditions.
The sensor is designed for use in the entire sewer network and at wastewater treatment plants, and the liquid-phase measurements are ideal for many applications in municipal & industrial wastewater, processed water, pulp & paper, and other industries.
Smart Odour & Corrosion Control
With the SulfiLogger™ H2S sensor’s reliable insights, it is possible to adopt a proactive and data-driven approach to H2S control.
The sensor has many applications including:
- Root cause analysis and investigation
Conduct short-term measurement campaigns in the network to identify hotspots, find the root cause of problems, investigate if problems are old or new, and to prioritize areas in need of mitigative actions. - Permanent monitoring
Permanently monitor critical network hotspots or wastewater treatment plant influents without interruptions to always know what’s going on. - H2S control application
Optimise chemical dosing operations. Measure the effect of existing dosing activities, make manual adjustments, or adopt semi- or fully automatic dosing strategies.
H2S sensor for the Oil & Gas industry
SulfiLogger™ H2S sensor – Measure H2S anywhere & without interruptions.
The SulfiLogger™ H2S sensor measures H2S virtually anywhere in oil & gas processing facilities.
The sensor provides precise and reliable sulfide insights without the need for manual sampling, gas preconditioning, or complex system modifications.
Optimized scavenger dosing with continuous, real-time H2S measurements in wet natural gas
Hydrogen sulfide (H2S) is a major challenge in on- and off-shore oil & gas processing where scavenger chemical dosing, test sampling, and unplanned downtime are costly affairs.
Offshore sensor installation right after the separator
The SulfiLogger™ H2S sensor enables cost-optimized desulphurization and greatly improved corrosion control by reliably measuring hydrogen sulfide directly in unprocessed natural gas streams. It provides a full and dynamic overview of the development in H2S levels with minimal delay, enabling for precise control of scrubbing chemicals including triazines.
The probe is built for long-term deployment in extreme environments, and it continuously measures hydrogen sulphide right after the first-stage oil & gas separator, or immediately before or after scavenger injection or other desulphurization processes.
Improved corrosion control and HSE with reliable & precise hydrogen sulfide monitoring
Being able to map H2S levels more precisely also means less corrosion in the pipelines and other equipment over time. This enables proactive and predictive maintenance planning, and reduces costs and unscheduled downtime.
The SulfiLogger™ H2S sensor eliminates the need for time-consuming and potentially hazardous test sampling, as it is designed for continuous and long-term monitoring directly in the process stream. It has the unique ability to measure directly in gas, multiphase, injection water, and produced water and therefore provides very accurate measurements of H2S levels.
H2S sensor for Biogas Plants
SulfiLogger™ H2S sensor
Optimized desulphurization with continuous, real-time H2S measurements in wet biogas.
Hydrogen sulfide (H2S ) is a problematic and corrosive byproduct of biogas processing that cause plant assets to deteriorate prematurely.
The SulfiLogger™ H2S sensor is an ideal tool in biogas processing because it measures H2S without interruptions in wet and unprocessed biogas exactly where you want.
As the sensor measures virtually anywhere in the production process, it provides the data needed to perform vital cost optimizations for single or multi-stage desulphurization processes.
Improved corrosion control with reliable & precise hydrogen sulfide monitoring
Being able to map H2S levels more precisely also means less corrosion in the pipelines and other equipment over time. This enables proactive and predictive maintenance planning, and reduces costs and unscheduled downtime.
The SulfiLogger™ H2S sensor eliminates the need for complex gas sampling systems and analyzers, as it is designed for continuous and long-term monitoring directly in the process stream. It has the unique ability to measure directly in gas, multiphase, injection water, and produced water and therefore provides very accurate measurements of H2S levels.